Primary Service Area: Minnesota, Wisconsin, Iowa, North and South Dakota

Excel Logo

Authorized Service Provider

Phone Icon

Please Call for Service
612.750.9353

Email Icon

jerry@requipbaler.com
Hours 8am-5pm CST Monday-Friday

Mail Icon

27091 Scenic Byway
Belle Plaine, MN 56011

New & Used Balers For Sale

Minimize Downtime and Find the Right Parts and Equipment with Requip. We stock and maintain inventory of baler parts and other recycling equipment. Our inventory of new, used and hard to find parts for equipment spans a wide range of manufacturers.

2R Series

 

2R63 Baler

Save time, labor, and money with a complete turn-key solution for your baling needs. The 2R63 two-ram, auto-tie baler chassis utilizes the same interlocking designs found in larger EXCEL® two-rams while remaining very economical. The 2R63 is constructed of four solid steel sheets (top, bottom, and both sides), providing seamless construction from end to end. Combine this innovative engineering with our use of only the highest quality components, and the result is the very best in durability and function.

The EXCEL® Model 2R63 bales the following materials: Office Paper, Newspaper, OCC, magazines, PET, HOPE, Aluminum Cans, Time Cans, Printer's Waste, and other materials.

Overview/Features

Standard Features Include:

  • The 2R63 is manufactured standard with either left-hand or right-hand eject.
  • U.S. Wire Tie Systems Automatic 13 Gauge Wire Tier, Model 343
  • 20HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • Horsepower Limited Pressure Compensated Piston Pump
  • 29 Second Main Ram Dry Cycle Time
  • Short Stroke Selector Reduces Cycle Time to 21 Seconds
  • Remote Operating Controls Mounted on Pedestal
  • Percent of Bale Complete Indicator Lights
  • Automatic Bale Sizing System
  • Automatic Shear Jam Correction
  • EXCEL's® 1-2-3 Limited Warranty (1 Year Labor, 2 Years Parts, 3 Years Structural and Cylinder) (U.S.A. Only)
  • Full Platen Penetration
  • Complete with MV32 Hydraulic Oil
  • NEMA 12 rated Enclosures and Controls
  • Power Unit Mounted on back of the Machine for Space Savings
  • Air/Oil Heat Exchanger
  • One Spool of 13 Gauge Ultra Tensile Galvanized Wire
  • Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
  • Standard Hopper
  • Lower Photo Eye
  • UL, CUL Approved (CE Available)
  • Available with an EXCEL® above ground or in-ground conveyor for a turn-key system

Additional Features:

  • Automatic Tie System Bale Discharge Table Lower Photo eyes
  • Full Platen Penetration Short Stroke Selector
  • Hour Meter
  • Interlocking Construction Air to Oil Cooler Regenerative Circuit
  • Bale Release Door
  • Replaceable Hardox Wear Liners
  • Percent of Bale Complete Indicator Lights (50%, 75%, 100%)
Specs

STRUCTURAL
HEIGHT: 62” Loading 52 1/2” Frame (158cm)
LENGTH: 179” (455cm)
WIDTH: 77” (196cm)
CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
FEED OPENING: 54”W (137cm) x 35”L (89cm)
BALER SHIPPING WEIGHT: 18,760 lbs. (8,509kg) (as shown)

PERFORMANCE DATA
PUMP: 34 gal. (130 liters) Pressure Compensated HorsePower Limited Piston Pump, 4,000 PSI Rated
DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
CYLINDERS: (2) 6” (15cm) Bore x 74” (188cm) Strokex 4” (10cm) Hard Chrome Rod
OIL RESERVOIR: 105 gal. (399 liters)
DOOR LATCH CYL.: N/A
MOTOR: TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
ENCLOSURE: NEMA 12 Rated, UL Approved
CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
PLATEN PSI: 92 PSI (6.33 BAR)
CYCLE TIME: 46 sec. – 30 sec. Short Stroke
TARGET BALE SIZE: 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *
OCC: 1,200 lbs. (544kg) TPH 2.4
MAGAZINES: 2,000 lbs. (907kg) TPH 5
NEWSPAPER: 1,500 lbs. (680kg) TPH 4.5
OFFICE PAPER: 1,600 lbs. (726kg) TPH 4.8
HDPE: 1,100 lbs. (499kg) TPH 1.7
PET: 800 lbs. (363kg) TPH 1.1 (May vary with percent of capped bottles)
ALUMINUM CANS: 625 lbs. (284kg) TPH 1.9
TIN CANS: 1,200 lbs. (544kg) TPH 3

2R9/10 Baler

EXCEL® couples interlocking construction with the most advanced control system in the industry for an indestructible, automated 2RAM Baler. EXCEL's® design for automated operation eliminates the need for a full-time operator. EXCEL's® superior quality means reduced down time, automatic operation and dramatic labor savings.

The EXCEL® Model 2R9/2R10 bales the following materials:

Office Paper, Newspaper, OCC, magazines, PET, HOPE, Aluminum Cans, Tin Cans, Painted Aluminum Siding, Insulated Wire, Aluminum Extrusions, Radiators, Copper Wire and Other Materials

Overview/Features

Standard features include:

  • The 2R9/2R1 O is manufactured standard with either left-hand or right-hand eject.
  • Operator-Free Operation
  • 50 HP TEFC Motor, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase (2-50 HP, 2R10)
  • EXCEL® Autonetics™ in with Absolute Ram Position Sensor with Electronic Display
  • U.S. Wire Tie Systems Automatic 342 Tier with Turbo Motor
  • Industrial Hardened Logic Controller
  • Fully Lined with Hardox® 400 Replaceable Wear Liners
  • 300 Gallon Hydraulic Reservoir with Regenerative Circuit (600 gallon 2R10)
  • One Year EXCEL® Limited Warranty (Parts & Labor)
  • Upper and Lower Photo Eyes (sender/receiver upper photo eye with integrated conveyor control)
  • NEMA 12 rated Enclosures and Controls with Conveyor Starter
  • Installed and Working Modem for On-Line Diagnostics
  • Castle Key Safety Interlocking Entry System
  • Bale Chamber Penetration (2R9 - 27")(2R10 - 24")
  • Automatic Bale Release Door
  • Automatic Shear Jam Correction
  • Bale Discharge Platform
  • One Spool of 12 Gauge Ultra High Tensile Galvanized Wire
  • Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
  • Air to Oil Heat Exchanger
  • Integrated Steel Platen Wiper
  • UL, CUL Approved (CE Available)
  • Bale Counter
  • Hardened, Serrated, Turn able Cutting Knives
  • Hour Meter
  • 9" eject cylinder
  • Separation Door for Solid Waste and Scrap Applications (Available Option)
  • Available with EXCEL® integrated conveyors with rubber or steel belts for a turn-key system
Specs

Specs

2R9

2R10

Structural:

 

 

Overall Length (A):

28'7" (8.75 meters) w/stairs)

33'10" feet (10.09 meters) w/stairs

 

 

Overall Width (B):

13'5" (4.11 meters)

 

13'5" (4.11 meters)

 

Overall Height (C):

8'8" (2.68 meters)

8'8" (2.68 meters)

Feed Opening:

 

40"W x 90"L (102cm x 229cm)

Chamber Floor:

3/4" Thick Plate plus 3/8" Hardox 400 Liner

1" Thick Plate plus 3/8" Hardox 400 Liner

Chamber Sidewalls:

3/4" Plate plus 3/8" Hardox 400 Liner

3/ 4" Plate plus 3/8" Hardox 400 Liner

 

Shipping Weight:

47,500 lbs. (21,545kg)

58,000 lbs. (26,308kg)

 

Approximate:

(with bale separation door)

(with bale separation door)

Performance:

 

 

Main Cylinder:

9"(22.9cm) bore x 106" (269cm) stroke 6"(15.2cm) hardened chrome rod

10"(25.4cm) bore x 130" (330cm) stroke

7"(17.8cm) hardened chrome rod

Eject Cylinder:

9"(22.9cm) bore - 6"(15.2cm) chrome rod

9"(22.9cm) bore - 6"(15.2cm) chrome rod

Oil Reservoir:

300 gallons (1,137 liters)

600 gallons (2,273 liters)

Independent Pumps:

100 GPM (379 liters

200 GPM (379 liters

Motors:

50 HP TEFC 460V, 3 Phase

2-50 HP, TEFC, 460V, 3 Phase

System Pressure:

3,000 PSI Automatic Mode (3,250 PSI Maximum)

3,000 PSI Automatic Mode (3,250 PSI Maximum)

Overall Platen Force:

190,851 lbs. / 206,756 lbs. Maximum

235,619 lbs. / 255,254 lbs. Maximum

Platen PSI:

162 PSI / 175 PSI Maximum

200 PSI / 216 PSI Maximum

Cycle Time:

20 seconds

16 seconds

Estimated Bale Size:

60"L X 45"W X 30"H (152cm x 114cm x 76cm)

60"L x 45"W x 30"H (152cm x 114cm x 76cm)

(Adjustable):

46.88 cu.ft. (1.33m3)

46.88 cu.ft. (1.33 m3)

Bale Weights*

 

 

Foam:

 

 

OCC:

1,400 lbs. (635kg) 8 TPH

1,500 lbs. (635kg) 8 TPH

HDPE Plastics:

1,300 lbs. (589kg) 5 TPH

1,350 lbs. (589kg) 5 TPH

PET Plastics:

1,200 lbs. (544kg) 6 TPH

1,325 lbs. (544kg) 6 TPH

Aluminum Cans:

800 lbs. (362kg) 6 TPH

1,000 lbs. (362kg) 6 TPH

Tin Cans:

2,000 lbs. (907kg) 15 TPH

2,200 lbs. (907kg) 15 TPH

Magazine:

2,400 lbs. (1,088kg) 20 TPH

2,500 lbs. (1,088kg) 20 TPH

Newspaper:

1,600 lbs. (726kg) 15 TPH

1,700 lbs. (726kg) 15 TPH

Office Paper:

 

 

Aluminum Intrusion:

1,400 lbs. (635kg) 6 TPH

1,500 lbs. (635kg) 6 TPH

Painted Aluminum Siding:

2,000 lbs. (907kg) 7.5 TPH

2,200 lbs. (907kg) 7.5 TPH

Radiators:

1,800 lbs. (816kg) 8 TPH

2,000 lbs. (816kg) 8 TPH

Insulated Copper Wire:

3,500 lbs. (1,587kg) 15 TPH

3,700 lbs. (1,587kg) 15 TPH

Misc. Non-Ferrous Scrap:

1,500 lbs. (680kg) 6 TPH

1,700 lbs. (680kg) 6 TPH

Solid Waste:

2,000 lbs. (907kg) 15 TPH

2,200 lbs. (907kg) 15 TPH
Markets