Primary Service Area: Minnesota, Wisconsin, Iowa, North and South Dakota

Excel Logo

Authorized Service Provider

Phone Icon

Please Call for Service
612.750.9353

Email Icon

jerry@requipbaler.com
Hours 8am-5pm CST Monday-Friday

Mail Icon

27091 Scenic Byway
Belle Plaine, MN 56011

New & Used Balers For Sale

Minimize Downtime and Find the Right Parts and Equipment with Requip. We stock and maintain inventory of baler parts and other recycling equipment. Our inventory of new, used and hard to find parts for equipment spans a wide range of manufacturers.

Distribution Centers

 

EX62/63 Series Baler

The EX63 produces high density bales of corrugated, paper, aluminum cans, tin cans, newspaper, PET, HDPE, textiles, and other recyclables. Full bale eject after each bale eliminates cross-contamiation when switching material grades.  Reduces labor costs over 75% compared to vertial balers.

Overview/Features

The EXCEL® Model EX62/63 bales the following materials: 
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials. 
Standard Features Include:

  • Hydraulic door latch (EX63 only)
  • Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
  • The EX63F is manufactured standard with either left-hand or right-hand door swing
  • 20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable shear blade with four cutting edges
  • Six fully guided wire tie slots
  • Automatic bale sizing system
  • Automatic shear jam correction
  • Short-stroke feature to reduce cycle time
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Remote controls — according to door swing
  • Safety interlock door with decompression
  • Clean-out tool, grease gun and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC -controlled operation
  • Available with an EXCEL® above-ground or inground conveyor for a turnkey system

Additional Features: Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox.
400 wear surfaces

Bale weights are based on actual customer surveys, and may differ with moisture content, material density, etc.Due to equipment upgrades, specifications are subject to change.

Specs

STRUCTURAL

  • HEIGHT: 62” Loading 52 1/2” Frame (158cm)
  • LENGTH: 179” (455cm)
  • WIDTH: 77” (196cm)
  • CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
  • FEED OPENING: 54” W (137cm) x 35” L (89cm)
  • BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

  • PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
  • DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
  • CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
  • OIL RESERVOIR: 105 gal. (399 liters)
  • DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
  • MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • ENCLOSURE: NEMA 12 Rated, UL Approved
  • CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
  • HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
  • OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
  • PLATEN PSI: 92 PSI (6.33 BAR)
  • CYCLE TIME: 29 sec. – 21 sec. Short Stroke
  • TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

  • OCC : 1,200 lbs. (544kg) TPH 3.3
  • MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
  • NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
  • OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
  • HDPE: 1,100 lbs. (499kg) TPH 2.3
  • PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
  • ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
  • TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

Markets

HV9/10 Baler

Two-ram construction in a single-ram baler: The EXCEL HV9 and HV10 have the revolutionary single-sheet, interlocking construction found in our two-ram balers. The floor and side sheets are all single sheets, cut to fit together for indestructible construction. The HV9 and HV10 bale newspaper, office paper, magazines, OCC, PET, HOPE, and aluminum and tin cans without preconditioning. Their extra heavy-duty construction allows the HVs to also bale painted aluminum siding, radiators, aluminum extrusion and insulated wires.
•    Extreme duty applications
•    Multimaterial handlers
•    Nonferrous processors

The EXCEL Model HV9 and HV10 bale the following materials: 
Office paper, newspaper, OCC, magazines, PET, HOPE, aluminum and tin cans, painted aluminum siding, insulated wire, aluminum extrusions, radiators, copper and other materials.
 

Overview/Features

Standard Features Include:

  • Patented hydraulic bale pusher bar: (HV10 only)
  • Extends to push bale beyond vertical door to allow tie off and ejection of the next bale
  • The HV9 and HV 10 are manufactured standard with either left-hand or right-hand hopper and controls
  • 50-horsepower TEFC motor, standard voltage—460-volt, 60-hertz, three-phase
  • Industrial hardened logic controller
  • Hardox 400 replaceable wear liners
  • 300-gallon hydraulic reservoir with regenerative circuit
  • One-year EXCEL limited warranty (parts and labor)
  • Tongue-and-groove corrugated floor
  • Automatic bale-sizing system
  • Automatic shear jam correction
  • NEMA 12-rated enclosures and controls on moveable pedestal
  • Castle key safety interlocking system
  • Full-bale chamber penetration
  • Standard hopper with inspection window
  • Clean-out tool, grease gun and extra spray paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed, and painted Excel Blue for long-lasting durability
  • Air-to-oil heat exchanger
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • Available with EXCEL integrated conveyors with rubber or steel belts for a turnkey system
Specs

STRUCTURAL
AUTOMATIC CLOSED END BALING PRESS
HEIGHT : 62” Loading 52 1/2” Frame (158cm)
LENGTH : 179” (455cm)
WIDTH : 77” (196cm)
CHAMBER : 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
FEED OPENING : 54”W (137cm) x 35”L (89cm)
BALER SHIPPING WEIGHT : 18,760 lbs. (8,509kg) (as shown)

PERFORMANCE DATA
PUMP : 34 gal. (130 liters) Pressure Compensated HorsePower Limited Piston Pump, 4,000 PSI Rated
DIRECTIONAL VALVE : D08 Pattern, Hi-Flow Cushion Shift Design
CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Strokex 4” (10cm) Hard Chrome Rod
OIL RESERVOIR : 105 gal. (399 liters)
DOOR LATCH CYL. : N/A
MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
ENCLOSUR : NEMA 12 Rated, UL Approved
CONTROLS : UL/CUL/CE Approved, NEMA 12 Rated
HYD SYSTEM PRESSURE : 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE : 159,400 lbs. (72 tonne)
PLATEN PSI : 92 PSI (6.33 BAR)
CYCLE TIME : 46 sec. – 30 sec. Short Stroke
TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *
OCC : 1,200 lbs. (544kg) TPH 2.4
MAGAZINES : 2,000 lbs. (907kg) TPH 5
NEWSPAPER : 1,500 lbs. (680kg) TPH 4.5
OFFICE PAPER : 1,600 lbs. (726kg) TPH 4.8
HDPE : 1,100 lbs. (499kg) TPH 1.7
PET : 800 lbs. (363kg) TPH 1.1 (May vary with percent of capped bottles)
ALUMINUM CANS : 625 lbs. (284kg) TPH 1.9
TIN CANS : 1,200 lbs. (544kg) TPH 3

Markets

2R9/10 Baler

EXCEL® couples interlocking construction with the most advanced control system in the industry for an indestructible, automated 2RAM Baler. EXCEL's® design for automated operation eliminates the need for a full-time operator. EXCEL's® superior quality means reduced down time, automatic operation and dramatic labor savings.

The EXCEL® Model 2R9/2R10 bales the following materials:

Office Paper, Newspaper, OCC, magazines, PET, HOPE, Aluminum Cans, Tin Cans, Painted Aluminum Siding, Insulated Wire, Aluminum Extrusions, Radiators, Copper Wire and Other Materials

Overview/Features

Standard features include:

  • The 2R9/2R1 O is manufactured standard with either left-hand or right-hand eject.
  • Operator-Free Operation
  • 50 HP TEFC Motor, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase (2-50 HP, 2R10)
  • EXCEL® Autonetics™ in with Absolute Ram Position Sensor with Electronic Display
  • U.S. Wire Tie Systems Automatic 342 Tier with Turbo Motor
  • Industrial Hardened Logic Controller
  • Fully Lined with Hardox® 400 Replaceable Wear Liners
  • 300 Gallon Hydraulic Reservoir with Regenerative Circuit (600 gallon 2R10)
  • One Year EXCEL® Limited Warranty (Parts & Labor)
  • Upper and Lower Photo Eyes (sender/receiver upper photo eye with integrated conveyor control)
  • NEMA 12 rated Enclosures and Controls with Conveyor Starter
  • Installed and Working Modem for On-Line Diagnostics
  • Castle Key Safety Interlocking Entry System
  • Bale Chamber Penetration (2R9 - 27")(2R10 - 24")
  • Automatic Bale Release Door
  • Automatic Shear Jam Correction
  • Bale Discharge Platform
  • One Spool of 12 Gauge Ultra High Tensile Galvanized Wire
  • Sandblasted, Primed, and Painted Excel Blue for Long Lasting Durability
  • Air to Oil Heat Exchanger
  • Integrated Steel Platen Wiper
  • UL, CUL Approved (CE Available)
  • Bale Counter
  • Hardened, Serrated, Turn able Cutting Knives
  • Hour Meter
  • 9" eject cylinder
  • Separation Door for Solid Waste and Scrap Applications (Available Option)
  • Available with EXCEL® integrated conveyors with rubber or steel belts for a turn-key system
Specs

Specs

2R9

2R10

Structural:

 

 

Overall Length (A):

28'7" (8.75 meters) w/stairs)

33'10" feet (10.09 meters) w/stairs

 

 

Overall Width (B):

13'5" (4.11 meters)

 

13'5" (4.11 meters)

 

Overall Height (C):

8'8" (2.68 meters)

8'8" (2.68 meters)

Feed Opening:

 

40"W x 90"L (102cm x 229cm)

Chamber Floor:

3/4" Thick Plate plus 3/8" Hardox 400 Liner

1" Thick Plate plus 3/8" Hardox 400 Liner

Chamber Sidewalls:

3/4" Plate plus 3/8" Hardox 400 Liner

3/ 4" Plate plus 3/8" Hardox 400 Liner

 

Shipping Weight:

47,500 lbs. (21,545kg)

58,000 lbs. (26,308kg)

 

Approximate:

(with bale separation door)

(with bale separation door)

Performance:

 

 

Main Cylinder:

9"(22.9cm) bore x 106" (269cm) stroke 6"(15.2cm) hardened chrome rod

10"(25.4cm) bore x 130" (330cm) stroke

7"(17.8cm) hardened chrome rod

Eject Cylinder:

9"(22.9cm) bore - 6"(15.2cm) chrome rod

9"(22.9cm) bore - 6"(15.2cm) chrome rod

Oil Reservoir:

300 gallons (1,137 liters)

600 gallons (2,273 liters)

Independent Pumps:

100 GPM (379 liters

200 GPM (379 liters

Motors:

50 HP TEFC 460V, 3 Phase

2-50 HP, TEFC, 460V, 3 Phase

System Pressure:

3,000 PSI Automatic Mode (3,250 PSI Maximum)

3,000 PSI Automatic Mode (3,250 PSI Maximum)

Overall Platen Force:

190,851 lbs. / 206,756 lbs. Maximum

235,619 lbs. / 255,254 lbs. Maximum

Platen PSI:

162 PSI / 175 PSI Maximum

200 PSI / 216 PSI Maximum

Cycle Time:

20 seconds

16 seconds

Estimated Bale Size:

60"L X 45"W X 30"H (152cm x 114cm x 76cm)

60"L x 45"W x 30"H (152cm x 114cm x 76cm)

(Adjustable):

46.88 cu.ft. (1.33m3)

46.88 cu.ft. (1.33 m3)

Bale Weights*

 

 

Foam:

 

 

OCC:

1,400 lbs. (635kg) 8 TPH

1,500 lbs. (635kg) 8 TPH

HDPE Plastics:

1,300 lbs. (589kg) 5 TPH

1,350 lbs. (589kg) 5 TPH

PET Plastics:

1,200 lbs. (544kg) 6 TPH

1,325 lbs. (544kg) 6 TPH

Aluminum Cans:

800 lbs. (362kg) 6 TPH

1,000 lbs. (362kg) 6 TPH

Tin Cans:

2,000 lbs. (907kg) 15 TPH

2,200 lbs. (907kg) 15 TPH

Magazine:

2,400 lbs. (1,088kg) 20 TPH

2,500 lbs. (1,088kg) 20 TPH

Newspaper:

1,600 lbs. (726kg) 15 TPH

1,700 lbs. (726kg) 15 TPH

Office Paper:

 

 

Aluminum Intrusion:

1,400 lbs. (635kg) 6 TPH

1,500 lbs. (635kg) 6 TPH

Painted Aluminum Siding:

2,000 lbs. (907kg) 7.5 TPH

2,200 lbs. (907kg) 7.5 TPH

Radiators:

1,800 lbs. (816kg) 8 TPH

2,000 lbs. (816kg) 8 TPH

Insulated Copper Wire:

3,500 lbs. (1,587kg) 15 TPH

3,700 lbs. (1,587kg) 15 TPH

Misc. Non-Ferrous Scrap:

1,500 lbs. (680kg) 6 TPH

1,700 lbs. (680kg) 6 TPH

Solid Waste:

2,000 lbs. (907kg) 15 TPH

2,200 lbs. (907kg) 15 TPH
Markets