Primary Service Area: Minnesota, Wisconsin, Iowa, North and South Dakota

Excel Logo

Authorized Service Provider

Phone Icon

Please Call for Service
612.750.9353

Email Icon

jerry@requipbaler.com
Hours 8am-5pm CST Monday-Friday

Mail Icon

27091 Scenic Byway
Belle Plaine, MN 56011

New & Used Balers For Sale

Minimize Downtime and Find the Right Parts and Equipment with Requip. We stock and maintain inventory of baler parts and other recycling equipment. Our inventory of new, used and hard to find parts for equipment spans a wide range of manufacturers.

EX Series

 

The EX63 produces high density bales of corrugated, paper, aluminum cans, tin cans, newspaper, PET, HDPE, textiles, and other recyclables. Full bale eject after each bale eliminates cross-contamiation when switching material grades.  Reduces labor costs over 75% compared to vertial balers.

Overview/Features

The EXCEL® Model EX62/63 bales the following materials: 
Office Paper, Newspaper, OCC, Magazines, PET, HDPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding, Textiles, and Other Materials. 
Standard Features Include:

  • Hydraulic door latch (EX63 only)
  • Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
  • The EX63F is manufactured standard with either left-hand or right-hand door swing
  • 20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable shear blade with four cutting edges
  • Six fully guided wire tie slots
  • Automatic bale sizing system
  • Automatic shear jam correction
  • Short-stroke feature to reduce cycle time
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Remote controls — according to door swing
  • Safety interlock door with decompression
  • Clean-out tool, grease gun and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC -controlled operation
  • Available with an EXCEL® above-ground or inground conveyor for a turnkey system

Additional Features: Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox.
400 wear surfaces

Bale weights are based on actual customer surveys, and may differ with moisture content, material density, etc.Due to equipment upgrades, specifications are subject to change.

Specs

STRUCTURAL

  • HEIGHT: 62” Loading 52 1/2” Frame (158cm)
  • LENGTH: 179” (455cm)
  • WIDTH: 77” (196cm)
  • CHAMBER: 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
  • FEED OPENING: 54” W (137cm) x 35” L (89cm)
  • BALER SHIPPING WEIGHT: 18,960 lbs. (8,600kg) (as shown)

PERFORMANCE DATA

  • PUMP: 34 gal. (130 liters) Pressure Compensated Horsepower Limited Piston Pump, 4,000 PSI Rated
  • DIRECTIONAL VALVE: D08 Pattern, Hi-Flow Cushion Shift Design
  • CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Stroke 4” (10cm) Hard Chrome Rod
  • OIL RESERVOIR: 105 gal. (399 liters)
  • DOOR LATCH CYL. : 4” (10cm) Bore x 6” (15cm) Stroke 2” (5cm) Rod
  • MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
  • ENCLOSURE: NEMA 12 Rated, UL Approved
  • CONTROLS: UL/CUL/CE Approved, NEMA 12 Rated
  • HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
  • OVERALL PLATEN FORCE: 159,400 lbs. (72 tonne)
  • PLATEN PSI: 92 PSI (6.33 BAR)
  • CYCLE TIME: 29 sec. – 21 sec. Short Stroke
  • TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *

  • OCC : 1,200 lbs. (544kg) TPH 3.3
  • MAGAZINES: 2,000 lbs. (907kg) TPH 7.5
  • NEWSPAPER: 1,500 lbs. (680kg) TPH 6.4
  • OFFICE PAPER: 1,600 lbs. (726kg) TPH 6.8
  • HDPE: 1,100 lbs. (499kg) TPH 2.3
  • PET : 800 lbs. (363kg) TPH 1.5 (May vary with percent of capped bottles)
  • ALUMINUM CANS: 625 lbs. (284kg) TPH 2.3
  • TIN CANS: 1,200 lbs. (544kg) TPH 4.5

Full Bale Ejection, Full Platen Penetration, Patented Safety Interlock Door, Tongue and Groove Floor, Hardox 400 wear surfaces.

EX63F Automated Closed End Baling Press is designed to bale a wide range of foam materials. The extra-large feed opening, and extra heavy-duty bale retainer dogs minimize material expansion into the infeed area. The large feed opening is also ideal for oversized corrugated. Excel Baler utilizes only the highest quality components available for optimal performance. Additional baling material include foam, OCC, plastics, cans, carpet padding and more.

Overview/Features

Standard features include:

  • Hydraulic door latch (EX63 only)
  • Regenerative circuit (EX63 only) reduces cycle time by 17 seconds
  • The EX63F is manufactured standard with either left-hand or right-hand door swing
  • 20-horsepower TEFC motor, standard voltage —208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable shear blade with four cutting edges
  • Six fully guided wire tie slots
  • Automatic bale sizing system
  • Automatic shear jam correction
  • Short-stroke feature to reduce cycle time
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Remote controls — according to door swing
  • Safety interlock door with decompression
  • Clean-out tool, grease gun and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC -controlled operation
  • Available with an EXCEL® above-ground or inground conveyor for a turnkey system

Additional features:

Full-bale ejection, full-platen penetration, patented safety interlock door, tongue-and-groove floor, Hardox 400 wear surfaces

* Bale weights are based on actual customer surveys and may differ with moisture content, material density and so on.

Due to equipment upgrades, specifications are subject to change.

Specs

STRUCTURAL
HEIGHT: 100 1/2 " Loading
LENGTH: 283"
WIDTH: 78 5/8"
CHAMBER FEED OPENING: 70"L x 54 1/2" W
SHIPPING WEIGHT : 20,000

PERFORMANCE DATA
PUMP: 34 gal. (130 Liters) Pressure CompensatedHorse Power Limited Piston Pump4,000 PSI Rated
DIRECTIONAL VALVE: D08 Pattern, High Flow Cushion Shift
CYLINDERS: (2) 6" (15cm) Bore x 124"
OIL RESERVOIR: 105 gal. (399 Liters)
DOOR LATCH CYL
MOTOR: 20 HP TEFC
ENCLOSURE
CONTROLS
HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE: 159,000 Lbs.
PLATEN PSI: 92 PSI
CYCLE TIME
TARGET BALE SIZE : 60"L x 48"W x 30"H

BALE WEIGHTS *
FOAM :1,200-1,600 lbs

Full-bale ejection, full-platen penetration, patented safety interlock door, tongue-and-groove floor, Hardox 400 wear surfaces

* Bale weights are based on actual customer surveys and may differ with moisture content, material density and so on.

Due to equipment upgrades, specifications are subject to change.

The EXCEL® models EX66 & EX77 are designed to be the most durable, efficient, and productive, closed-end single ram baler in the industry. with EXCEL's® innovative, patented, vertical lifting door, the EX66 & EX77 distinguish themselves as the most dependable, practical and universal balers ever built in this class of balers.

Overview/Features

The EXCEL® Model EX66 bales the following materials: Office Paper, Newspaper, OCC, Magazines, PET, HOPE, Aluminum Cans, Tin Cans, Plastic Film, Carpet Padding & Textiles. EX77 also bales Aluminum Siding, Tin, Insulated Wire, Radiators, and other Light Non-Ferrous materials.

Standard features include:

  • Two 6-inch (15.24-cm) cylinders (EX66 only)
  • Two 6.5-inch (16.51-cm) cylinders (EX77 only)
  • Remote controls on pedestal (EX77 only)
  • Hardox 400 replaceable wear liners
  • The EX66 and EX77 are manufactured standard with a patented, hydraulic, vertical lifting door
  • 20-horsepower TEFC motor, standard voltage— 208-, 230- or 460-volt, 60-hertz, three-phase
  • Horsepower limited pressure compensated piston pump
  • Removable, turnable serrated shear blade with 32 cutting points
  • Five fully guided wire tie slots
  • Automatic shear jam correction
  • Automatic bale sizing system
  • Short-stroke feature to reduce cycle time
  • 29-second dry cycle time/21 time short stroke (EX66 only)
  • EXCEL’s 1-2-3 warranty (one-year labor, two-year parts and three-year structural)
  • Complete with MV32 hydraulic oil
  • NEMA 12-rated enclosures and controls
  • Full-bale ejection
  • Full-platen penetration
  • Clean-out tool and extra touch-up paint
  • One bundle of 12-gauge x 13-foot single loop wire ties
  • Sandblasted, primed and painted Excel Blue for long-lasting durability
  • Standard hopper
  • Lower photo eye
  • UL-, CUL-approved (CE available)
  • PLC controlled operation
  • Available with EXCEL above-ground or inground conveyor for a turnkey system
Specs

STRUCTURAL
HEIGHT: 100 1/2 " Loading
LENGTH: 283"
WIDTH: 78 5/8"
CHAMBER FEED OPENING: 70"L x 54 1/2" W
SHIPPING WEIGHT: 20,000

PERFORMANCE DATA
PUMP: 34 gal. (130 Liters) Pressure CompensatedHorse Power Limited Piston Pump4,000 PSI Rated
DIRECTIONAL VALVE: D08 Pattern, High Flow Cushion Shift
CYLINDERS: (2) 6" (15cm) Bore x 124"
OIL RESERVOIR: 105 gal. (399 Liters)
DOOR LATCH CYL
MOTOR: 20 HP TEFC
ENCLOSURE
CONTROLS
HYD SYSTEM PRESSURE: 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE: 159,000 Lbs.
PLATEN PSI: 92 PSI
CYCLE TIME
TARGET BALE SIZE: 60"L x 48"W x 30"H

BALE WEIGHTS 
FOAM :1,200-1,600 lbs estimated