Manufacturing Facility

HV9/10 Baler

Two-ram construction in a single-ram baler: The EXCEL HV9 and HV10 have the revolutionary single-sheet, interlocking construction found in our two-ram balers. The floor and side sheets are all single sheets, cut to fit together for indestructible construction. The HV9 and HV10 bale newspaper, office paper, magazines, OCC, PET, HOPE, and aluminum and tin cans without preconditioning. Their extra heavy-duty construction allows the HVs to also bale painted aluminum siding, radiators, aluminum extrusion and insulated wires.
•   Extreme duty applications
•   Multimaterial handlers
•   Nonferrous processors

The EXCEL Model HV9 and HV10 bale the following materials:
Office paper, newspaper, OCC, magazines, PET, HOPE, aluminum and tin cans, painted aluminum siding, insulated wire, aluminum extrusions, radiators, copper and other materials.

Overview/Features

Standard Features Include:

Patented hydraulic bale pusher bar: (HV10 only)
Extends to push bale beyond vertical door to allow tie off and ejection of the next bale
The HV9 and HV 10 are manufactured standard with either left-hand or right-hand hopper and controls
50-horsepower TEFC motor, standard voltage—460-volt, 60-hertz, three-phase
Industrial hardened logic controller
Hardox 400 replaceable wear liners
300-gallon hydraulic reservoir with regenerative circuit
One-year EXCEL limited warranty (parts and labor)
Tongue-and-groove corrugated floor
Automatic bale-sizing system
Automatic shear jam correction
NEMA 12-rated enclosures and controls on moveable pedestal
Castle key safety interlocking system
Full-bale chamber penetration
Standard hopper with inspection window
Clean-out tool, grease gun and extra spray paint
One bundle of 12-gauge x 13-foot single loop wire ties
Sandblasted, primed, and painted Excel Blue for long-lasting durability
Air-to-oil heat exchanger
Lower photo eye
UL-, CUL-approved (CE available)
Available with EXCEL integrated conveyors with rubber or steel belts for a turnkey system

Specs

STRUCTURAL
AUTOMATIC CLOSED END BALING PRESS
HEIGHT : 62” Loading 52 1/2” Frame (158cm)
LENGTH : 179” (455cm)
WIDTH : 77” (196cm)
CHAMBER : 47”L (119cm) x 60”W (152cm) x 30”H (76cm)
FEED OPENING : 54”W (137cm) x 35”L (89cm)
BALER SHIPPING WEIGHT : 18,760 lbs. (8,509kg) (as shown)

PERFORMANCE DATA
PUMP : 34 gal. (130 liters) Pressure Compensated HorsePower Limited Piston Pump, 4,000 PSI Rated
DIRECTIONAL VALVE : D08 Pattern, Hi-Flow Cushion Shift Design
CYLINDERS : (2) 6” (15cm) Bore x 74” (188cm) Strokex 4” (10cm) Hard Chrome Rod
OIL RESERVOIR : 105 gal. (399 liters)
DOOR LATCH CYL. : N/A
MOTOR : TEFC 208, 230, 460 Volt, 60 Hertz, 3 Phase
ENCLOSUR : NEMA 12 Rated, UL Approved
CONTROLS : UL/CUL/CE Approved, NEMA 12 Rated
HYD SYSTEM PRESSURE : 4,000 PSI (276 Bar)
OVERALL PLATEN FORCE : 159,400 lbs. (72 tonne)
PLATEN PSI : 92 PSI (6.33 BAR)
CYCLE TIME : 46 sec. – 30 sec. Short Stroke
TARGET BALE SIZE : 60”L (152cm) x 48”W (122cm) x 30”H (76cm)

BALE WEIGHTS *
OCC : 1,200 lbs. (544kg) TPH 2.4
MAGAZINES : 2,000 lbs. (907kg) TPH 5
NEWSPAPER : 1,500 lbs. (680kg) TPH 4.5
OFFICE PAPER : 1,600 lbs. (726kg) TPH 4.8
HDPE : 1,100 lbs. (499kg) TPH 1.7
PET : 800 lbs. (363kg) TPH 1.1 (May vary with percent of capped bottles)
ALUMINUM CANS : 625 lbs. (284kg) TPH 1.9
TIN CANS : 1,200 lbs. (544kg) TPH 3

Markets

New & Used Balers For Sale

Manufacturing Facility

HV9/10 Baler